Dimension Drawings - Siemens SIMOTICS M-1FE2 Configuration Manual

Dimension drawings

You can find the dimension drawings for the 1FE2 built-in motors under Dimension drawings
for the 1FE2 (https://support.industry.siemens.com/cs/ww/en/view/109783766) in SIOS.
Note
Siemens AG reserves the right to change the motor dimensions as part of design
improvements without prior notification.
You can also find the dimension drawings for the required motors in:
CAD CREATOR (http://www.siemens.com/cadcreator),
DT CONFIGURATOR (http://siemens.de/dt-konfigurator) or
Catalog NC62
mc/intraDocs/catalogs/nc622019/NC%2062%20-%202019%20-
%20Complete%20Catalog/motion-control-NC62-complete-English-2019.pdf)
Additional information about 1FE2 built-in motors is provided in the associated Hardware
Installation Manual.
SIMOTICS M-1FE2 built-in motors
Configuration Manual, 05/2021, A5E50494252B AB
(https://intranet.for.siemens.com/org/i-dt-
10
147