Table of Contents
Advertisement
Mounting the motor
Protection against the spread of fire
The device may be operated only in closed housings or in control cabinets with protective
covers that are closed, and when all of the protective devices are used. The installation of the
device in a metal control cabinet or the protection with another equivalent measure must
prevent the spread of fire and emissions outside the control cabinet.
Protection against condensation or electrically conductive contamination
Protect the device, e.g. by installing it in a control cabinet with degree of protection IP54
according to IEC 60529 or NEMA 12. Further measures may be necessary for particularly
critical operating conditions.
If condensation or conductive pollution can be excluded at the installation site, a lower
degree of control cabinet protection may be permitted.
5.1
Overview
Safety symbols on the motor
The following warning and information labels are attached to the motor in the delivery state.
Besides, the motor is supplied with three additional "Hot surface" warning labels.
①
②
1PH3 main motors
Equipment Manual, 01/2021, A5E43087278-004
"Hot surface" warning sign
"No shocks on the shaft end" warning sign
5
61
Advertisement
Table of Contents
