Receive Data Rate; Receive Fec Type; Receive Coding Rate; Figure 3-70 Receive Data Rate Prompt - Comtech EF Data Vipersat CDM-570 User Manual

V i p e r s a t C o nf i g u r a t i o n
Note that this screen dialog example displays the frequency range for the CDM-
570L L-Band modem. For the CDM-570, the range displayed will be either 50
to 90 MHz or 100 to 180 MHz.

Receive Data Rate

Enter N at the command prompt to use the dialog shown in Figure 3-70 to set
the Receive Data Rate for the target CDM-570/570L's home state.
Note that the valid range for this parameter will vary depending on the modula-
tion type, coding rate, and FAST feature data rate.

Receive FEC Type

Enter O at the command prompt to use the dialog shown in figure 3-71 to set the
Receive FEC Type for the target CDM-570/570L's home state. Turbo must be
selected when operating in Vipersat mode.

Receive Coding Rate

Enter P at the command prompt to use the dialog shown in Figure 3-72 to set
the Receive Coding Rate for the target CDM-570/570L's home state.
3-48
Figure 3-70
Receive Data Rate prompt
Figure 3-71
Receive FEC Type prompt
V i p e r s a t C D M - 5 7 0 / 5 7 0 L U s e r G u i d e