The Feature Configuration screen shown in figure 3-3 allows enabling and
disabling CDM-570/570L features.
Use this menu to enable and disable Vipersat features such as:
• Vipersat STDMA
• Vipersat Auto Switching
• Vipersat File Streamer
Note: You must enable and disable these Vipersat features using this
NOTE
Vipersat Feature Codes menu
The Vipersat feature codes can be entered as three hexidecimal digits at the
command prompt as shown figure 3-4 and determine which Vipersat features
have been purchased for the target CDM-570/570L and are available for use.
Similarly, unlock codes determine which CDM-570/570L features have been
purchased and are available for use on the target CDM-570/570L.
Tip: You may find it more convenient to use the Vipersat Vload utility to
Vipersat Management
This item is an information only display and indicates whether Vipersat
Management is enabled or disabled in the target Vipersat CDM-570/570L. Acti-
vation of the Vipersat Feature Code automatically enables the Vipersat Manage-
ment feature.
Caution: This command must be enabled in order to use any of the
C h ap t e r
U s i n g t h e C o m m a n d L i n e I n t e r f a c e ( C L I )
3 -
screen. They cannot be enabled or disabled from the Vipersat
Configuration screen.
Figure 3-4
manage feature and unlock codes.
Vipersat capabilities of the CDM-570/570L.
Feature and unlock code dialog
M e n u D e s c r i p t i o n s
3-5