Vipersat File Streaming (Vfs); Automatic Home State Control (Remote Unit); Ecm User Defined Switch Type - Comtech EF Data Vipersat CDM-570 User Manual

P r o d u c t D e s c r i p t i o n
modem parameters are now preserved across firmware upgrades and reboots,
eliminating a potential cause of communications failure.

Vipersat File Streaming (VFS)

The Vipersat File Streaming feature option allows data files to be streamed over
the Vipersat network at high transmission rates between PC hosts running the
VFS application.

Automatic Home State Control (Remote Unit)

VMS communications management of Remote units is now improved with the
Home State Revert feature. By configuring a time value (in minutes) in the
VMS for each Remote in the network, resource recovery is performed on SCPC
connections when a communications failure occurs between the VMS and a
Remote, such as a rain fade condition, a Remote unit power down, or a hard-
ware failure. Should communications be lost for more than the selected time
period, the Remote will automatically revert to its Home State settings and the
VMS will remove all allocated resources (bandwidth, demod(s)), freeing them
for use by any other Remotes in the network.

ECM User Defined Switch Type

New SCPC switching flexibility is provided by the Entry Channel Mode (ECM)
user-defined policy switch type feature. The STDMA Remote Policies can be
set for the desired SCPC data rate (kbps) and the Switch Type (0=Load, 64-255
range is user-defined).
V i p e r s a t C D M - 5 7 0 / 5 7 0 L U s e r G u i d e
1-8