Delete Remote; Enable/Disable Remote; View Remote(S); Figure 3-25 Delete Remote Prompt - Comtech EF Data Vipersat CDM-570 User Manual

V i p e r s a t C o n f i g u r a t io n
Figure 3-24
Global Switch Type prompt

Delete Remote

Entering D at the command prompt shown in figure 3-16 brings up the Delete
Remote dialog shown in figure 3-25.
Figure 3-25
Delete Remote prompt
Enter the number of the Remote CDM-570/570L at the command prompt to
delete it from the STDMA group for this Hub modem.

Enable/Disable Remote

Enter E at the command prompt in figure 3-16 to display the dialog shown in
figure 3-26. The Remotes in the STDMA group are displayed, indicating
whether each is currently Enabled (E) or Disabled.
Figure 3-26
Enable/Disable Remote prompt
Enter the number of the Remote at the command prompt to toggle the Remote
from its current Enable/Disable configuration.

View Remote(s)

Entering V at the command prompt shown in figure 3-16 will display the listing
of Remote(s) that belong to the STDMA group for this Hub modem, as shown
in figure 3-27.
C h ap t e r U s i n g t h e C o m m a n d L i n e I n t e r f a c e ( C L I )
3 - 3-19