Lcd Language; Primary Line - VTech CM18245 User Manual

Telephone settings
Deskset setup

LCD language

This feature allows you to change the language used for all screen displays.
The language settings on the console and desksets are independent. By
default, the language is set to English.
1. When the deskset is idle, press MENU
2. Press or
/SKIP.
3. Press or
/SKIP.
4. Press or
SELECT or /SKIP to save the setting and return to the
5. Press
MENU/
previous menu. To exit without making changes, press CANCEL or
/REPEAT.

Primary line

Use this feature, also known as automatic line selection, to choose which line is
automatically selected each time you make an outside call. If you select Auto,
the deskset picks up any available line starting from Line 1.
1. When the telephone is idle, press MENU
2. Press or
SELECT or /SKIP.
MENU/
3. Press or
SELECT or /SKIP.
MENU/
4. Press or
To exit without making changes, press CANCEL.
NOTE: If you install less than four telephone line cords to the CM18445/AM18447 console
and select Auto as your Primary line setting, make sure you plug in your telephone line
cords starting from L1/2 jack. Avoid having any unoccupied telephone jack between other
occupied telephone jacks.
to scroll to Deskset setup, then press
to scroll to LCD Language, then press
to select English, Français or Español.
to scroll to Deskest setup, then press
to scroll to Primary line, then press
to choose the desired line, then press
.
/SELECT
.
/SELECT
MENU/
21
SELECT or
MENU/
SELECT or
MENU/
SELECT or /SKIP.