Table of Contents
Advertisement
PASSWORD
To select
, press the ENTER button to show PASSWORD on the display. Use the DOWN/UP
buttons to change the password (000 to 9999). Once the address has been selected, press the
ENTER button to setup. To go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for about one second or wait for 7 seconds to exit the menu
mode.
LOCK
To select
, press the ENTER button to show LOCK on the display. Use the DOWN/UP buttons
to select
(blackout) or
the ENTER button to setup. To go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the current mode.
DISPLAY INVERSE
To select
, press the ENTER button to show DISPLAY INVERSE on the display. Use the
DOWN/UP buttons to select
been selected, press the ENTER button to setup. To go back to the functions without any changes
press the MENU button again. Press and hold the MENU button for about one second or wait for 7
seconds to exit the current mode.
AUTO TEST
To select
, press the ENTER button to show AUTO TEST on the display and the unit will run a
self-test . To go back to the functions without any changes press the MENU button again. Press and
hold the MENU button for about one second or wait for 7 seconds to exit the current mode.
(normal) mode. Once the mode has been selected, press
(normal) or
10D
(inversion) mode. Once the mode has
Advertisement
Table of Contents
