Table of Contents
Advertisement
the menu mode.
BLACKOUT MODE
To select
, press the ENTER button to show BLACKOUT MODE on the display. Use the
DOWN/UP buttons to select
(blackout) or
(normal) mode. Once the mode has
been selected, press the ENTER button to setup. To go back to the functions without any changes
press the MENU button again. Press and hold the MENU button for about one second or wait for 7
seconds to exit the current mode.
MANUAL TEST
To select
, press the ENTER button to show MANUAL TEST on the display. Use the DOWN/UP
button to select
(red),
(green),
(blue),
(white),
(dimmer) or
(strobe) on the display. Once the mode has been selected, press the ENTER button to
confirm. Use the DOWN/UP buttons to specify a value for the chosen effect from 0 to 255. To go
back to the functions without any changes press the MENU button again. Press and hold the MENU
button for about one second or wait for 7 seconds to exit the menu mode.
WHITE BALANCE
To select
, press the ENTER button to show WHITE BALANCE on the display. Use the
DOWN/UP button to select
(red),
(green) or
(blue). Once selected, press the
ENTER button to confirm .Use the DOWN /UP buttons to change its value (125 to 255). Once the
address has been selected, press the ENTER button to setup. To go back to the functions without
any changes press the MENU button again. Press and hold the MENU button for about one second
or wait for 7 seconds to exit the menu mode.
9D
Advertisement
Table of Contents
