Table of Contents
Advertisement
LED DISPLAY
, press the ENTER button to show LED DISPLAY on the display. Use the DOWN/UP
To select
button to select
press the ENTER buttons to setup. To go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the current mode.
FIXTURE TEMPERATURE
To select
, press the ENTER button to show the FIXTURE TEMPERATURE on the display and
the display will show the temperature of the unit. To go back to the functions without any changes
press the MENU button again. Press and hold the MENU button for about one second or wait for 7
seconds to exit the menu mode.
FIXTURE USE HOURS
To select
, press the ENTER button to show FIXTURE USE HOURS on the display and the
display will show the number of working hours of the unit . To go back to the functions without any
changes press the MENU button again. Press and hold the MENU button for about one second or
wait for 7 seconds to exit the current mode.
FIRMWARE VERSION
To select
, press the ENTER button to show FIRMWARE VERSION on the display and the
display will show the version of software of the unit . To go back to the functions without any
changes press the MENU button again. Press and hold the MENU button for about one second or
wait for 7 seconds to exit the current mode.
(LED on) or
(LED off) mode. Once the mode has been selected,
11D
Advertisement
Table of Contents
