1. Manuals
  2. Brands
  3. ACME Manuals
  4. Lighting Equipment
  5. BW-54-10FC II RL
  6. User manual

ACME BW-54-10FC II RL User Manual

Building wash
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for ACME BW-54-10FC II RL

Summary of Contents for ACME BW-54-10FC II RL

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. Safety Instructions ......................2 2. Techical Specfications ....................3 3. Installation ........................4 4. How To Set The Fixture ....................5 4.1 Control Panel......................5 4.2 Main Functions ....................... 6 5. How To Control The Unit ..................... 10 5.1 Master/Slave Built In Preprogrammed Function ..........

  • Page 3: Safety Instructions

    1. Safety Instructions Please read the instructions carefully which includes important information about the installation, operation WARNING and maintenance.  Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. Caution：...

  • Page 4: Techical Specfications

     To protect the machine, power off 10s rear can electrify. 2. Techical Specfications BW-54-10FC II RL: 54pcs x10W CREE Quad Color Building Wash with Built-in LED Display for Rental Application. BW-54-10FC II WT RL: with Built-in Wireless Receiver and LED Display for Rental Application.

  • Page 5: Installation

    3. Installation The fixture can be placed directly on the stage floor which can support 10 times of the fixture’s weight or can be rigged on the structure via two omega clamps in the positions you want. Ensure that the structure (truss, wall) to which you are attaching the unit is secure. Mounting holes are intended for permanent installation on the flat surface, especially in the wall installation.

  • Page 6: How To Set The Fixture

    4. How To Set The Fixture 4.1 Control Panel ①：Power Water proof connectors for power input. ②：DMX input Water proof connectors for DMX 512 operation, 3-pin XLR cable to input DMX signal. ③：DMX output Water proof connectors for DMX 512 operation, 3-pin XLR cable to output DMX signal.

  • Page 7: Main Functions

    4.2 Main Functions Open the metal cover and remove it then you can set the menu manually. To select any functions, press MENU button until the required one is shown on the display. Select the function by ENTER button and the display will blink. Use DOWN and UP button to change the mode.
  • Page 9 DMX 512 Address Setting 1. Press the MENU button until is displayed. Press ENTER. 2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired address. When you have found your desired DMX address press ENTER to confirm or automatically exit menu mode without any change after one minute.
  • Page 10 you have made your adjustments. 6. Once your desired color and settings are reached, press ENTER to confirm or automatically exit menu mode without any change after one minute, Back to the functions without any change press MENU button. Adjust White Balance 1.

  • Page 11: How To Control The Unit

    Display Inversion 1. Press the MENU button until is displayed, Press ENTER. 2. Press the UP button to select , the display will reverse 180°,or to change the display back. Press ENTER when you made your desired setup. LED Mode 1.

  • Page 12: Master/Slave Built In Preprogrammed Function

    control the unit, you can follow User Manual of VD-T. 5.1 Master/Slave Built In Preprogrammed Function By linking the units in master/slave connection, the first unit will control the other units to give an automatic, synchronized light show. This function is good when you want an instant show.

  • Page 13: Dmx 512 Configuration

    5.3 DMX 512 Configuration...

  • Page 15: Dmx512 Connection

    5.4 DMX512 Connection 1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable. 2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.

  • Page 16: Troubleshooting

    6. Troubleshooting Following are a few common problems that may occur during operation and some suggestions for easy troubleshooting: Problem Possible Cause Action Check the connection of The unit does not work, no Incorrect power cable power. light. connection. Incorrect mains voltage. Measure the mains voltage on the main connector.

  • Page 17: Cleaning And Maintenance

    7. Cleaning and Maintenance DANGER! Disconnect from the mains before starting any cleaning or maintenance work. The unit must be cleaned periodically to optimize light output. Cleaning frequency depends on the environment where the unit will operate: deposits of dust, smokes or other wastes will reduce the light output performances.
  • Page 19 Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55103-1: 2009 ; EN55103-2: 2009; EN62471: 2008; EN61000-3-2: 2006 + A1:2009 + A2:2009; EN61000-3-3: 2008. &...
  • Page 20 Innovation, Quality, Performance...

This manual is also suitable for:

Bw-54-10fc ii rl wt

Table of Contents