Table of Contents
Advertisement
DMX ADDRESS
To select
, press the ENTER button to show DMX ADDRESS on the display. Use the DOWN/UP
buttons to adjust the address from 1 to 512. Once the address has been selected, press the ENTER
button to setup. To go back to the functions without any changes press the MENU button again.
Press and hold the MENU button for about one second or wait for 7 seconds to exit the menu
mode.
CHANNEL MODE
To select
, press the ENTER button to show CHANNEL MODE on the display. Use the
DOWN/UP button to select 4, 4D, 4C or 40 channel modes. Once the mode has been selected, press
the ENTER button to setup. To go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
the menu mode.
SHOW MODE
To select
, press the ENTER button to show SHOW MODE on the display. Use the DOWN/UP
buttons to select
confirm, the
fade time (0-255); and press the ENTER button again, the
DOWN/UP button to adjust the wait time (0-255). Press and hold the MENU button for about one
second or wait for 7 seconds to exit the menu mode.
DIMMER SPEED
To select
, press the ENTER button to show DIMMER SPEED on the display. Use the
DOWN/UP button to select
press the ENTER button to setup. To go back to the functions without any changes press the MENU
button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit
(show 1) or ...
(fade time) will blink on the display, use the DOWN/UP button to adjust the
(smooth) or
(show 16), and then press the ENTER button to
(fast). Once the mode has been selected,
8D
will blink to display, use the
Advertisement
Table of Contents
