CONTENTS 1. Safety Instructions ..................2 2. Technical Specifications ................. 4 3. How To Set The Unit ..................5 3.1 Control Panel ................... 5 3.2 Main Functions ..................6 4. Control By Universal DMX Controller ............12 4.1 DMX512 Connections ................12 4.2 Address Setting ..................
1. Safety Instructions Please read the instruction carefully which includes important information about the installation, usage and maintenance. WARNING Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction manual. Important: Damages caused by the disregard of this user manual are not subject to warranty.
Page 4
Avoid any inflammable liquids, water or metal objects entering the unit. Once it happens, cut off the mains power immediately. DO NOT operate in dirty or dusty environment, do clean fixtures regularly. DO NOT touch any wire during operation as there might be a hazard of electric shock. ...
Extra installation of the barn door can prevent glare and stray light effectively (optional) Dimensions/Weight: 953x104x112mm, 10.6kgs 37.5"x4.1"x4.4"in, 23.4lbs 104 mm Photometrics Diagram: 3. How To Set The Unit 3.1 Control Panel 1. DMX IN: Water proof connectors for DMX512 operation, use 3-pin XLR cable to input DMX signal 2.
3. Function Display: To show the various menus and the selected functions 4. Button: MENU To select the programming functions DOWN To go forward in the selected functions To go backward in the selected functions ENTER To confirm the selected functions 5.
Page 8
DMX ADDRESS CHANNEL MODE SHOW MODE DIMMER SPEED BLACKOUT MODE MANUAL TEST MENU WHITE BALANCE PASSWORD LOCK NORMAL DISPLAY INVERSION AUTO TEST LED DISPLAY FIXTURE TEMPERATURE FIXTURE USE HOURS FIRMWARE VERSION...
Page 9
DMX ADDRESS To select , press the ENTER button to show DMX ADDRESS on the display. Use the DOWN/UP buttons to adjust the address from 1 to 512. Once the address has been selected, press the ENTER button to setup. To go back to the functions without any changes press the MENU button again. Press and hold the MENU button for about one second or wait for 7 seconds to exit the menu mode.
Page 10
the menu mode. BLACKOUT MODE To select , press the ENTER button to show BLACKOUT MODE on the display. Use the DOWN/UP buttons to select (blackout) or (normal) mode. Once the mode has been selected, press the ENTER button to setup. To go back to the functions without any changes press the MENU button again.
Page 11
PASSWORD To select , press the ENTER button to show PASSWORD on the display. Use the DOWN/UP buttons to change the password (000 to 9999). Once the address has been selected, press the ENTER button to setup. To go back to the functions without any changes press the MENU button again.
Page 12
LED DISPLAY , press the ENTER button to show LED DISPLAY on the display. Use the DOWN/UP To select button to select (LED on) or (LED off) mode. Once the mode has been selected, press the ENTER buttons to setup. To go back to the functions without any changes press the MENU button again.
4. Control By Universal DMX Controller 4.1 DMX512 Connections 1. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.
4.2 Address Setting Use universal DMX controller to control the units, you have to set DMX address from 1 to 512 channels so that the units can receive DMX signal. Press the MENU button, and the will blink on the display. Use the DOWN/UP button to change the DMX512 address.
Page 15
5 Channels Mode: 4D CHANNEL VALUE FUNCTION 000-255 0%100% GREEN 000-255 0%100% BLUE 000-255 0%100% WHITE 000-255 0%100% DIMMER 000-255 0%100% 7 Channels Mode: 4C CHANNEL VALUE FUNCTION 000-255 0%100% GREEN 000-255 0%100% BLUE 000-255 0%100% WHITE 000-255 0%100% COLOR 000-007 008-015 Color 1...
Page 16
117-123 Color 15 124-131 Color 16 132-140 Color 17 140-147 Color 18 148-154 Color 19 155-162 Color 20 163-170 Color 21 171-178 Color 22 179-185 Color 23 186-193 Color 24 195-201 Color 25 202-209 Color 26 210-216 Color 27 217-224 Color 28 225-232 Color 29...
5. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power. 2.
Page 19
Declaration of Conformity We declare that our products (lighting equipments) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 2014/30/EU. EN 55032: 2015; EN61000-3-2: 2014; EN 61000-3-3: 2013; EN 55103-2: 2009. &...