WEG ADW300 User Manual page 4

Summary of Reviews
The information below describes the revisions made to this manual.
Version
-
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the factory setting (check
P403), it is necessary to set:
P204 = 5 for 60 Hz.
„
P204 = 6 for 50 Hz.
„
It is only necessary to set these parameters once.
Refer to the programming manual of the ADW300 for further details about the
programming of parameter P204.
Review
R00 First edition
Description