Table of Contents
Advertisement
Pulse Oximetry
To attach a fiber to the clip, use the
index finger to open the clip and
position the fiber as shown. Push
the fiber into the large grove along
the length of the clip making sure
the collar is in close proximity to the
end of the clip.
Grasp the collar with the thumb and
index finger and insert the collar
groves into the tracks of the clip.
Use the index finger to push the
collar to the end of the clip opening.
To remove the fiber, grasp the fiber
with the thumb and index finger as
shown. Push the fiber to move the
collar away from the clip.
Then
grasp the collar with the thumb and
index finger and remove the collar
from the clip.
Revision C, August 2013
11-3
Advertisement
Table of Contents
