Selecting Events Recorded In Trend Data - SA Instruments 1030 Operation Manual

The OUTPUT FILE SETUP window allows the following items to be defined for the
exported data file:
Header information
Time column format
Seconds per output line
Trends per output line
Column and line delimiters
Number for bad data
The time exported can be as seconds from the start or actual time. Usually one second
is output per line, but very large data sets may necessitate multiple seconds per output
line. The number of trends per output line defaults automatically to the number selected
for output. The most common choices for column and line delimiters are
accommodated. Bad data which is set to "-1" in the trend file can be set to any other
value.

Selecting events recorded in trend data

Events are recorded in the trend data file as item 64. An event selection key can be
used to step through the events. A comment window displays comments entered for
each event.
Revision C, August 2013
Trends
7-5