Bruker Mini 0.5 Ahs/Rf Imaging Probe - SA Instruments 1030 Operation Manual

Micro-Imaging MR Systems
The temperature probe, ECG needle electrodes and rectal temperature probe are
shown below in the extended position for connection to the mouse outside the imaging
coil.
After connecting the sensors to the mouse and inserting the mouse into the coil, excess
cable should be taped to eliminate a loop and placed in the cavity in the midsection.
Likewise, excess pneumatic tubing should be placed in the cavity in front of the Leur
connection. Be careful not to kink the pneumatic tubing.
The same set of sensors and temperature extension cable can be used with the Micro
2.5 AHS/RF probe.

Bruker Mini 0.5 AHS/RF Imaging Probe

The Mini 0.5 AHS/RF probe has the same connections for physiological monitoring as
the Micro 2.5 probes. However, the Mini 0.5 probe is longer requiring the use of ECG
(ETLEC-703-3), temperature (TPEC-109-3) and respiration (RSET-1/4) extension
cables.
Revision C, August 2013
18-4