Table of Contents
Advertisement
three-way stopcock valve #1
connect to
animal cannula
The Abbott Transpac IV transducer can be connected directly to the IBP Module at the
IBP connection. If the transducer connector has a protective boot around it, remove the
boot. The connection snaps into the receptacle and locks with the locking clip.
three-way stopcock
valve #1
connect to
animal cannula
Invasive blood pressure transducers from other manufacturers can also be used with
the system.
obtained by contacting SAII Customer Service.
Abbott Transpac IV IBP transducer
snap tab
valve #2
However, an adapter cable will be required.
Revision C, August 2013
Invasive Blood Pressure
connect to IV set or syringe
valve #2
remove boot and
connect to IBP
connection on IBP
Module
connect to
adapter
cable and
then to IBP
connection
on IBP
Module
Adapter cables can be
10-3
Advertisement
Table of Contents
