Water Bed Heater System
WBH USER INTERFACE window
Clicking the Water Bed button in the HEATER window opens the WBH USER
INTERFACE window.
The message area in the upper right of the window gives status and error messages.
On the left of the window the user can select the controlled temperature and then enter
a temperature set point. On the right are the following buttons:
Start or stop the heater
Display or hide Systems Settings window
Return to the previous HEATER window
Show or hide graph which displays temperature trends (under development)
Display a Test and Service window
If the Test and Service button is not visible, right click under the "close" button and it will
appear.
.
19-2
Revision C, August 2013