User Guide
• HTTPS: The checkbox is selected by default. Uncheck Enable to disable secure web browsing.
• IPMI over LAN: The checkbox is selected by default. Uncheck Enable to disable IPMI access over LAN.
3. Save the new settings.
A message notifying that the parameters of the security section have been set will appear.
Figure 417: Security Settings Set
5.3.4
Network Settings
This section provides information related to the network settings for the BMC Web GUI. The Administrator
may enable, disable, or configuring the network settings for the IPv4 Network, IPv6 Network, and VLAN. When
changing any settings related to networking, it is important to notify any users of upcoming changes to avoid
conflicts. Also, ensure that all hosts that are physically connected to the enclosure are available after the
network settings have been changed.
5.3.4.1
Configuring the IPv4 Network Settings
Note: The user is required to log in with a user that has Operator privileges or higher to configure IPv4
Network Settings. For more information on how to log into the BMC Web GUI, see:
BMC Web GUI
1. From the Menu Bar, select Configuration > IPv4 Network.
on page 303.
317
5
System Management
5.3
HGST BMC Web GUI
Logging into the