Western Digital Ultrastar Serv60+8 User Manual page 290

User Guide
c) While the BIOS is running through its boot sequence, press F6 and select EFI shell from the boot device
menu.
Figure 370: Launch EFI Shell
The EFI shell will automatically launch the Startup.nsh file and start the BIOS update. The BIOS will
begin to flash on the system and the enclosure will restart. Once the system restarts, it will run through
the different components to verify that there were no errors that occurred during the update. The
enclosure will restart a second time to finish applying the BIOS updates.
5. Once the enclosure boots through the normal boot screen, navigate to the BIOS folder and delete the
Startup.nsh file. Failure to delete the Startup.nsh can lead to boot loop issues on the enclosure.
6. Check the latest BIOS version using the BMC Web GUI.
a) From the Menu Bar, select System > System Information.
Figure 371: System Menu — System Information
b) In the System Firmware Version section, locate the BIOS ID.
290
5 System Management
5.2 BIOS Firmware Update