Western Digital Ultrastar Serv60+8 User Manual page 247

User Guide
b) Remove all cabling from the add-in card.
Figure 318: Add-In Card Remove Cabling and Uninstall
c) Carefully pull up on the add-in card until it comes free from the connector on the baseboard.
33. Install the DIMMs.
a) Remove the new DIMM from the packaging and hold it by the corners to avoid damaging the DIMM.
b) Align the DIMM with the empty slot ensuring that it is facing in the correct direction.
Figure 319: Installing the DIMM into the DIMM Slot
247
4 Part Replacement
4.14 Chassis Replacement