User Guide
4.12 CMA Replacement
Table 42: Replacement Procedure Info
Required Tools
•
# 2 Philips
Screwdriver
• Cable Ties (for
configurations
with greater
than 10 total
cables)
• Tape Measure
1. Place the CMA into service position.
a) Unlatch the CMA at the elbow connector by pressing the blue release button to unlatch the connector
from the rail.
Figure 242: Unlatching a CMA Connector
b) Swing the CMA away from the enclosure.
Required Parts
•
Low-Profile
M4 x 3.2mm
Philips screws
196
# of People Required
1
4
Part Replacement
4.12
CMA Replacement
Time Required
15m