Changing Your Manual Backup Settings - Western Digital WD Dual-option User Manual

4. Select the drive on which to store your backup files. By default, the Western Digital drive
on which the button was pressed is selected as the destination. Click Next.
Note: The destination cannot be the same drive selected as the source for backup in
Step 2. Retrospect Express will not let you proceed until you choose a different
destination drive.
5. The last window summarizes all the settings you specified in the Backup On Demand
wizard. If you need to make any changes, click Back. Otherwise, click Finish to complete
the wizard and begin your first backup. Every time you press the Backup On Demand
button, Retrospect Express will launch the wizard and back up your data.

Changing Your Manual Backup Settings

Follow the steps below if you want to change your Backup On Demand settings.
1. Press the Backup On Demand button.
2. The wizard displays a summary of your existing choices and gives you a ten second
countdown to accept the settings or click Modify to change your settings. Clicking
Modify will take you through the Backup On Demand wizard to make your desired
changes. If no selection is made, your settings will remain the same.
Note: See the preceeding "Backup On Demand" section for more details.
WD DUAL-OPTION MEDIA CENTER AND COMBO HARD DRIVE
USING THE BACKUP SOFTWARE - 16
USER MANUAL