Configuring The Ipv6 Network Settings - Western Digital Ultrastar Serv60+8 User Manual

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

3. Save the new settings.

A message notifying that the parameters of the IPv4 Network Settings section have been set will appear.

Configuring the IPv6 Network Settings

Note: The user is required to log in with a user that has Operator privileges or higher to configure IPv6

Network Settings. For more information on how to log into the BMC Web GUI, see:

1. From the Menu Bar, select Configuration > IPv6 Network.

on page 303.

System Management

HGST BMC Web GUI

Logging into the