PIONEER DJ Serato XDJ-RX3 Instruction Manual page 111

• Some buttons on the unit can't be used for controlling a DJ application.
• Control mode turns off when a track is loaded to the unit from a device other than the
currently communicating device that's running the DJ software.
• Touch the deck number of the deck information display on the waveform screen to switch
the control deck between 1 and 3, or 2 and 4.
• If you set [MIXER MODE] to [XDJ-RX3] in the Utility settings, the mixer section will work as
a standalone mixer (page 116).
Using DJ software
111