Table of Contents
Advertisement
Channel section
Input selector switch
1.
Selects an input sound source.
— [DECK 1, DECK 2] : Selects a deck on the unit.
— [LINE] : Selects a multi player, etc. connected to the [LINE] terminals.
— [PHONO] : Selects a turntable connected to the [PHONO] terminals.
2.
TRIM knob
Adjusts the volume for the channel input sound.
EQ/ISO (HI, MID, LOW) knobs
3.
Adjusts the volume of each frequency band.
Each knob adjusts in the following range.
— [HI]: -∞ dB to +6 dB (ISO)/-26 dB to +6 dB (EQ)
— [MID]: -∞ dB to +6 dB (ISO)/-26 dB to +6 dB (EQ)
— [LOW]: -∞ dB to +6 dB (ISO)/-26 dB to +6 dB (EQ)
Channel level indicator
4.
Displays the volume level before the sound passes through the channel fader.
COLOR knob (page 97)
5.
6.
CUE button (page 90)
CROSSFADER CURVE switch
7.
Sets the crossfader curve.
— THRU : Doesn't use the crossfader.
—
: Gradually raises the volume of the sound assigned to the other side as the
crossfader is moved from one side (DECK 1 or DECK 2 side) to the other, and
decreases the volume of the sound on the side it's moving away from.
—
: Steeply raises the volume of the sound assigned to the other side as the
crossfader is moved from one side (DECK 1 or DECK 2 side) to the other.
Channel fader
8.
Adjusts the volume for the channel output sound according to the channel fader curve
set with [CHANNEL FADER CURVE] in the Utility settings or on the [SHORTCUT]
screen (pages 115, 120). Moving it up increases the volume, and down decreases the
volume.
86
Audio output
Advertisement
Table of Contents
