Outputting Sound - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Crossfader
9.
Adjusts the volume balance between the channel output sounds according to the
crossfader curve specified with the [CROSSFADER CURVE] switch. Moving it to the [<A]
side outputs the sound of DECK 1, and to the [B>] side outputs the sound of DECK 2.
Master section
10. MASTER LEVEL knob
Adjusts the volume for the master sound.
11. CLIP indicator
Blinks when excessive volume is output from the [MASTER 1] or [MASTER 2] terminals.
12. Master level indicator
Displays the volume level of the master sound output to the [MASTER 1] and [MASTER
2] terminals.

Outputting sound

Adjusting the channel input volume
1 Slide the input selector switch to select an input sound
source.
2 Turn the [TRIM] knob to adjust the volume for the input sound.
The channel level indicator lights up when sound is input to the channel.
87
Audio output