PIONEER DJ Serato XDJ-RX3 Instruction Manual page 117

Setting item
TOUCH DISPLAY
CALIBRATION
AUTO STANDBY
VERSION No.
The settings can be set on the [ SHORTCUT ] screen.
Auto standby
When [AUTO STANDBY] is set to [ON], the unit enters standby mode after 4 hours without
being used in the following ways.
— No audio signal is input to the unit.
— No storage device (USB) is connected to the unit.
— No PC/Mac is connected to the unit via the USB port on the rear of the unit.
Press the [MASTER REC (WAKE UP)] button to exit standby mode.
• The factory setting is [ON].
• Set [AUTO STANDBY] to [OFF] if you don't need to use the auto standby function.
Description
Adjusts the touch display calibration with a touch of [+]
displayed on the screen.
• If [+] doesn't move, touch it for a little longer.
• Do not use sharp-pointed objects such as a ballpoint pen
to make the setting.
Sets the auto standby function (page 117).
• Setting values: OFF, ON*
Displays the version of the software on the unit.
117
Settings