Hot Cue/Gate Cue - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Hot Cue/Gate Cue

You can call up a Hot Cue quickly and start playback by pressing a Performance Pad.
Setting a Hot Cue
1 Press the [HOT CUE/CALL (GATE CUE)] button.
The unit switches to Hot Cue mode.
2 Press a Performance Pad at the point where you want to set a
Hot Cue during playback or pause.
A Hot Cue is set.
• You can set up to 8 Hot Cues per track.
• Hot Cues are assigned to the Performance Pads as follows.
Hot Cue Hot Cue
A
Hot Cue Hot Cue
E
• If you do this during loop playback, a loop is set instead.
• You can't set a Hot Cue to any Performance Pads that have a one set already. To set
a new Hot Cue, delete a one from a button first (page 79).
• Performance Pads light up as follows according to the set function. You can change the
colors using rekordbox.
Set function
Cue point
Loop
No setting
Using the Performance Pads
Hot Cue
Hot Cue
B C
D
Hot Cue
Hot Cue
F G
H
[HOT CUE COLOR] setting in the Utility settings
[OFF]
Green
Orange
No light
[ON]
Fixed button color
Orange
No light
77