Using Dj Software; Controlling Dj Software - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Using DJ software

If you connect a PC/Mac with MIDI software installed, to the unit via a USB cable, you can
control the DJ software via the unit.
• To play tracks stored on a PC/Mac with the unit, install the dedicated audio driver software
(page 13).
• For details on the unit's MIDI messages, visit the URL below.
pioneerdj.com/support/
• Install DJ software and configure the audio and MIDI settings on a PC/Mac beforehand.
• You don't need to make MIDI settings when you use rekordbox or Serato DJ Pro with the
unit.

Controlling DJ software

1 Connect a PC/Mac to the unit.
Read more: Rear panel (page 20)
2 Press the [SOURCE] button.
The [SOURCE] screen appears.
Read more: SOURCE screen (page 22)
3 Select [SOFTWARE CONTROL].
The [SOFTWARE CONTROL] screen appears.
4 Press the [LOAD 1] or [LOAD 2] button.
The deck on which you press the button switches to control mode.
5 Launch the DJ software.
The unit starts communication with the DJ software.
110