Using Beat Fx - PIONEER DJ Serato XDJ-RX3 Instruction Manual

TIME knob
5.
Adjusts the time parameter for Beat FX.
LEVEL/DEPTH knob
6.
• Turn the knob all the way counterclockwise to output the original sound.
ON/OFF button
7.
Turns Beat FX on and off. The button blinks when the effect is turned on.

Using Beat FX

Read more: Beat FX types and settings (page 104)
1 Turn the Beat FX selector switch to select a Beat FX.
• When Beat FX are registered to Beat FX Bank, you can select a Beat FX by touching
a Beat FX Bank slot (page 109).
2 Turn the Beat FX channel selector switch to select a channel
to apply the Beat FX to.
3 Press the [BEAT
to synchronize the effect with.
4 Turn the [TIME] knob and [LEVEL/DEPTH] knob to adjust the
effect.
5 Press the [ON/OFF] button or touch X-PAD to turn the Beat FX
on.
The Beat FX is applied to the selected channel.
• Press the [ON/OFF] button again or release X-PAD to turn the Beat FX off.
] or [BEAT ] button to set a beat fraction
101
Beat FX