Slip - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Slip

If you turn Slip mode on, normal playback continues in the background (but you can't hear it)
when you perform the following operations.
When you end the operation, Slip is canceled and normal playback starts from the exact point
the track would have reached by then. This means the original rhythm remains constant and
your performance stays perfectly in time.
Function
Slip Pause
Slip Scratch
Slip Loop
Slip Reverse
Slip Hot Cue
Description
If you press the [PLAY/PAUSE
in Vinyl mode (page 59), playback continues in the
background during the pause.
If you scratch a track using the jog wheel while in Vinyl mode
(page 59), normal playback continues in the background
while you are scratching.
If you start loop playback (page 65), normal playback
continues in the background while the loop is playing.
If you press the [DIRECTION (REV)] button during playback,
playback is reversed. Normal playback continues in the
background during reverse playback.
Reverse playback is automatically canceled after 8 beats
from the point where the [DIRECTION (REV)] button is
pressed and playback starts from the exact point the track
would have reached by then.
If you press a Performance Pad with a Hot Cue set during
playback, the playback point jumps to the Hot Cue point and
playback continues until you release the button. Normal
playback continues in the background during Hot Cue
playback.
Hot Cue playback is automatically canceled after 4 beats
from the point where the Performance Pad is pressed and
playback starts from the exact point the track would have
reached by then.
71
] button during playback