Beat Sync; Using Beat Sync - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Beat Sync

If you turn Beat Sync on, tempo (BPM) and beat position of tracks on DECK 1 and DECK 2 of
the unit automatically synchronize.
• Beat Sync can't be used with tracks that haven't been analyzed by rekordbox.

Using Beat Sync

1 Play a track analyzed by rekordbox on the deck (DECK 1 or
DECK 2) you want to set as the sync master.
• The deck that first plays a track analyzed by rekordbox will be the sync master.
• You can set either deck as the sync master by pressing the [MASTER] button on the
deck.
2 Play a track analyzed by rekordbox on the deck you want to
sync with the sync master.
3 Press the [BEAT SYNC/INST.DOUBLES] button on the deck
you want to sync with the sync master.
Beat Sync turns on.
• Press the [BEAT SYNC/INST.DOUBLES] button again to turn Beat Sync off.
If the position of the [TEMPO] slider doesn't match the playback tempo (BPM), the Beat
Sync tempo is maintained. To restore normal use of the [TEMPO] slider, load the track
again or move the slider until the BPM matches the playback tempo. After this, you'll be
able to use the [TEMPO] slider to adjust the tempo.
73