Beatgrid; Adjusting The Beatgrid - PIONEER DJ Serato XDJ-RX3 Instruction Manual

Beatgrid

You can adjust the beatgrid.
• You can't adjust the beatgrid for tracks that haven't been analyzed by rekordbox.

Adjusting the beatgrid

1 Press and hold the rotary selector on the waveform screen, or
touch and hold [ZOOM]/[GRID] on the screen.
Grid Adjust mode turns on.
2 Turn the rotary selector to adjust the beatgrid.
• You can also adjust the beatgrid using the following buttons on the screen.
– [SNAP GRID(CUE)]: Moves the first beat position to a cue point.
– [SHIFT GRID]: Applies the settings (Pitch Bend, etc.) adjusted during
synchronization.
– [<1/2], [1/2>]: Moves the beatgrid by 1/2 beat.
• Touch [RESET] to reset to the original beatgrid.
• To return to Zoom mode, press and hold the rotary selector on the waveform screen, or
touch and hold [ZOOM]/[GRID] on the screen again.
75