Fine-adjusting loop points
1 Press the [LOOP IN/4 BEAT (IN ADJUST)] or [LOOP OUT (OUT
ADJUST)] button during loop playback.
The unit switches to loop adjusting mode.
— [LOOP IN/4 BEST (IN ADJUST)]: Adjusts the loop-in point.
— [LOOP OUT (OUT ADJUST)]: Adjusts the loop-out point.
2 Press the [SEARCH
jog wheel to fine-adjust the loop point.
• The adjustable range for the loop-in point is ±30 frame unit.
• Press the [LOOP IN/4 BEAT (IN ADJUST)] or [LOOP OUT (OUT ADJUST)] button again,
or leave the unit without operating the controls for more than 10 seconds to resume loop
playback.
Adjusting the length of a loop
Halving the length of a loop
1 Press the [CUE/LOOP CALL
loop playback.
The loop length is halved each time you press the button.
] or [SEARCH
(LOOP 1/2X)] button during
66
Looping
] button or turn the