PIONEER DJ Serato XDJ-RX3 Instruction Manual page 116

Setting item
MIC OUT TO MASTER REC
HEADPHONES MONO
SPLIT/STEREO
MIXER MODE
The settings can be set on the [ SHORTCUT ] screen.
GENERAL category
Setting item
LANGUAGE
LCD BRIGHTNESS
JOG LCD BRIGHTNESS
SCREEN SAVER
Description
Determines whether or not to output the microphone sound
to Master Rec (recording sound).
• Setting values: ON*, OFF
Sets the output method (monaural or stereo) for the
headphones monitor sound.
• Setting values: MONO SPLIT, STEREO*
Sets the operation mode.
• Setting values: XDJ-RX3*, MIDI CONTROL
Description
Sets the display language.
Sets the brightness of the screen.
• Setting values: 1, 2, 3*, 4, 5
Sets the brightness of the display on the jog wheel.
• Setting values: 1, 2, 3*, 4, 5
Sets the screen saver.
• Setting values: OFF, ON*
• When set to [ON], the screen saver starts if:
– You don't use the unit for more than 5 minutes when
a track isn't loaded.
– You don't use the unit for more than 100 minutes
during pause, during cue standby, or after playback
reaches the end of a track.
• Use the unit to cancel the screen saver.
116
Settings
*: Factory setting