Table of Contents
Advertisement
• Touch [DECK 1] or [DECK 2] to switch the active deck.
Pad mode status/Beat FX controls
3.
Displays the pad mode being used on the deck, or Beat FX controls (Beat FX Bank and
X-PAD).
4.
Enlarged waveform
Displays the enlarged waveform, cue points, loop points, and Hot Cue points, etc. that
have been analyzed by rekordbox.
• You can change the waveform color in [MY SETTINGS MENU] on the [SOURCE]
screen or [WAVEFORM COLOR] on the [SHORTCUT] screen (page 119).
5.
Master Rec timer
Displays the recording time when using Master Rec (page 57).
6.
INFO
Touch to display or hide the detailed information for the loaded track (page 41).
7.
Beat FX
Displays the selected Beat FX (effect name) (page 101).
8.
Channel
Displays the channel selected with the Beat FX channel selector switch (the channel the
effect will be applied to).
BPM (for Beat FX)
9.
Displays BPM (beats per minute, i.e. tempo).
• In Auto mode, the automatically detected BPM is displayed.
• In Manual Setting mode, the BPM is displayed in green and [TAP] is displayed.
10. Parameter
Displays the msec (milliseconds) and beat parameters set for the selected effect.
11. QUANTIZE indicator (for Beat FX)
Displayed in white when Quantize for Beat FX is turned on and active, and in gray when
it's turned on but not active (page 103).
12. Zoom/Grid Adjust mode indicator
Press and hold the rotary selector or touch and hold [ZOOM]/[GRID] to switch between
Zoom and Grid Adjust modes.
• Turn the rotary selector to control the following.
– In Zoom mode: Zooms in and out of the waveforms of DECK 1 and DECK 2 at the
same time.
– In Grid Adjust mode: Adjusts the beatgrid for the track loaded on the active deck
(page 75).
26
Part names
Advertisement
Table of Contents
