JCM GLOBAL TBV-100 FSH Quick Reference Manual page 2

This Guide applies to the following TBV Models:
Device
TBV-100 FSH
TBV-101 FSH
TBV-100 FLD
TBV-101 FLD
TBV-100 GLD
TBV-101 GSH
TBV-101 ASH
Table 2 lists Issues, Probable Causes and Possible Solutions when
troubleshooting this TBV Unit.
Table 2 TBV Troubleshooting Descriptions
Issue
TBV Unit is not
working. (Bezel
and CPU Board
LEDs are OFF.)
© 2019 JCM Global Corporation
TBV™-100/101 Units
QUICK REFERENCE
TROUBLESHOOTING GUIDE
O
Table 1 TBV Model Descriptions
BNF, Horizontal Stack Cash Box, Centering Path
BNF, Horizontal Stack Cash Box, Fixed Path
BNF, No Cash Box, Centering Path
BNF, No Cash Box, Fixed Path
Single note, Gated Bezel, No Cash Box, Centering Path
Single note, Gated Bezel, Horizontal Stack Cash Box,
Fixed Path
Single note, JCM Standard Bezel, Horizontal Stack Cash
Box, Fixed Path
Probable Cause
Power is not
supplied to the
TBV Unit.
The program is not
active. Firmware
Download has not
completed correctly.
The CPU Board is
malfunctioning.
The TBV is not
communicating with
the Host machine.
Interface DIP Switch
Settings incorrect.
VERVIEW
Version Description
Possible Solutions
Check that interface connectors are
properly fitted. Verify the Power
Supply meets specification.
Re-download the correct Firmware.
Check internal Harness and
connectors. Replace the CPU Board.
Check the interface settings and the
DIP Switch Settings.
2
Part No. 960-000207R_Rev. A