JCM GLOBAL TBV-100 FSH Quick Reference Manual page 16

STANDARD LED FLASH CODES
Error conditions are indicated by different colors flashing on the
Bezel LED (Yellow, Red or Green). Note the number of flashes
between pauses to identify the indicated Error.
B J
ANKNOTE
Banknote Jam Errors are indicated by the number of
flashes. When a Sensor is blocked and the TBV Unit does not accept
a Banknote, the Bezel LED will flash Yellow. Count the flashes that
exist in between the longer pause periods to determine the correct
Error Code number (Table 9).
NOTE: Refer to the TBV
Operation and Maintenance Manual (JCM P/N 960-100926R)
for a full description of errors and corrective actions.
YELLOW
Flashes
1
2
3
4
5 Remaining Banknote
Cash Box Lock Released Sensors detect the Cash Box has been
6
7 Transport Cover Open
© 2019 JCM Global Corporation
TBV™-100/101 Units
E
AM RRORS
Table 9 Banknote Jam Error Codes
Error Type
Banknote Jam
in Cash Box
Banknote Jam in
Transport Section
Note Chain
Cash Box Removed
Series Transaction Based Validator
™
When transporting Banknotes to the
Cash Box, Sensors did not detect the
correct number of Banknotes.
When transporting Banknotes in the
Transport Section, Sensors did not
detect the correct number of
Banknotes.
The BNF Assignation Sensor does not
detect an unblocked condition in the
correct timeframe.
The Cash Box has been removed.
Sensors detect a Banknote with
abnormal timing.
unlocked.
Sensors detect that the Transport
Cover is open.
16
YELLOW
Cause
Part No. 960-000207R_Rev. A
LED