JCM GLOBAL TBV-100 FSH Quick Reference Manual page 12

BLUEWAVEDX (DT-300)
To access BlueWaveDX Download Tools, perform the following
steps:
1. Copy the
the SD Card for the BlueWaveDX.
2. Connect the BlueWaveDX (DT-300) Unit to the TBV Unit
using a Male A to mini-B USB Cable (Figure 5
3. Slide the BlueWaveDX Power switch ON (Figure 5
4. From the Firmware menu, press the OK button (Figure 5
5. Scroll through the TBV Firmware versions to select the
desired version, then press the OK button (Figure 5
6. Press the OK button to begin the Download (Figure 5
7. When the Download is complete, press the CLR button to
return to the menu (Figure 5
8. Disconnect the USB Cable from the Unit (Figure 5
© 2019 JCM Global Corporation
TBV™-100/101 Units
TBV Firmware
Figure 5 BlueWaveDX (DT-300) Unit
a
file to the
TBV-100 System
).
d
d
12
folder on
).
a
).
b
).
c
).
c
).
a
c
b
Part No. 960-000207R_Rev. A
).
c