JCM GLOBAL TBV-100 FSH Quick Reference Manual page 11

BLUEWAVE DOWNLOAD TOOLS
BLUEWAVE 2.0 (DT-200)
To access BlueWave 2.0 Download Tools, perform the following
steps:
1. Copy the
folder.
2. Place the TBV Unit in Forced Download mode (with
Switches
DS3
3. Reapply Power to the TBV Unit.
4. Connect the BlueWave 2.0 (DT-200) Unit to the TBV Unit
(Figure 4
5. When the BlueWave 2.0 Unit's Top LED (Figure 4
GREEN, press the
Firmware Download.
6. When the BlueWave 2.0 Unit's Top and Middle LEDs
(Figure 4
© 2019 JCM Global Corporation
TBV™-100/101 Units
TBV Firmware
and
#1, 6, 7
) using a Male A to mini-B USB cable.
a
Load
) turn GREEN, the Download is complete.
b/c
Figure 4 BlueWave 2.0 (DT-200) Unit
a
b
c
d
file to the SD Card's
).
8 ON
Button (Figure 4
11
DOWNLOAD
DS1
) turns
b
) to start the
d
Part No. 960-000207R_Rev. A
or