Downloading Firmware - JCM GLOBAL TBV-100 FSH Quick Reference Manual

OPERATIONAL MODE FUNCTIONS
D
OWNLOADING
To update the TBV Unit's Firmware, proceed as follows:
1. Open the
JCM Tool Suite Application
2. Connect the
3. Click
Download
4. On the
JCM Downloader Suite Edition Version x.xx
, click the
3)
TBV Firmware
5. Click the
Download
Download progress is shown by a progress barograph and a
percentage complete indication located above the Graph.
NOTE: Forced Download may be required if a new CPU
Board is installed or if the normal Download does not
complete properly.
In Forced Download Mode, DIP Switch DS1 or DS3 Switches
1, 6, 7 and 8 are ON, and Forced Download is indicated by a
Flashing
6. Verify that the download indicates
Download is now complete.
Figure 3 JCM Downloader Suite Edition Version x.x.x Screen
© 2019 JCM Global Corporation
TBV™-100/101 Units
F
IRMWARE
to the PC using a USB Cable.
TBV Unit
from the
Service Mode
button (Figure 3 a) to select the appropriate
Browse
file from
Windows
button (Figure 3 b) to start the Download.
GREEN LED Status Indicator.
b
.
drop-down Menu.
™ .
Explorer
Download Success.
10
screen
(Figure
The
a
Part No. 960-000207R_Rev. A