To Set The Baseband Operating Mode To N5102A - Keysight Technologies N5166B CXG User Manual

To set the Baseband Operating Mode to N5102A

In this mode, all installed and licensed signal generator features as well as all N5102A features are
fully supported, but BERT features are not available.
Figure 11-3 Changing to the N5102A Baseband Operating Mode
The N5102A annunciator is displayed indicating that the
N5102A Baseband Operating Mode is currently selected.
(For more information on annunciators, see
1. Press Aux Fctn.
2. Press Baseband Operating Mode.
(Default selection is Primary, but image above shows changing from BERT.)
3. Press N5102A. (Press the Return key to cancel the change.)
Changing the Baseband Operating Mode selection will cause all files in the
volatile w
confirming the change.
See
4. After reading the above caution and taking any needed actions,
press Confirm Change to N5102A Operating Mode or Return to cancel.
This confirmation selects the N5102A ARB FPGA image. All N5102A features are fully supported,
but BERT is not available in this N5102A Baseband Operating Mode. For backwards
compatibility, selecting the N5102A Baseband Operating Mode sets the I/Q Digital Bus
Connectivity to N5102A.
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
.)
page 27
aveform memory to be lost. Backup any files you want to keep before
"Working with Files" on page 76
Baseband Operating Mode—Primary, BERT, or N5102A
To set the Baseband Operating Mode to N5102A
.
343