Basic Operation
Working with Files
Working with Files
—
File Softkeys
on page 77
—
Viewing a List of Stored Files
—
Storing a File
on page 80
—
Loading (Recalling) a Stored File
—
Moving a File from One Media to Another
—
Working with Instrument State Files
—
Selecting the Default Storage Media
The signal generator recognizes several types of files, such as instrument state files, license files,
and list sweep files. Files can be stored either in the signal generator's internal storage or on the
USB media. This section provides an overview of how to navigate the signal generator's file menus,
and how to view, store, load, and move files.
The Keysight CXG, MXG, and EXG nonvolatile internal memory is allocated according to a Microsoft
compatible file allocation table (FAT) file system. Refer to the Programming Guide.
See also:
Storing, Loading, and Playing a Waveform Segment
76
on page 78
on page 81
on page 82
on page 82
on page 87
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
on page 209.