Loading (Recalling) A Stored File - Keysight Technologies N5166B CXG User Manual

Loading (Recalling) a Stored File

There are several ways to load (recall) a stored file.
— For an instrument state file, use the Recall hardkey shown in
— For other types of data, use the Load/Store softkey (shown below) that is available through the
menu used to create the file.
Loading a File From USB Media
To load a file from USB media, use the USB file manager shown below.
File > Catalog Type > <type> > More > USB File Manager
or
File > More > USB File Manager
or
Insert the USB media
This key changes, depending
on the selected file.
Copy & Select User Flatness
Copy & Play Waveform
Copy & Play Sequence
Enter Directory
Recall Instrument State
Load List
Load Pulse Train
Install licenses
No action (USB disconnected)
Use As
If the signal generator does not recognize the file,
you must select how the file is to be used.
For details on each key, use key help as described on
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide
File Type
List
State
Waveform
User Flatness
User Preset
License
Pulse Train
page 60
.
Figure 3-8 on page
File Type
List
State
Waveform
User Flatness
User Preset
Pulse Train
Extension Pressing Select with file highlighted...
.list loads list and starts sweep
.state load instrument state
.waveform loads and plays waveform
.uflat loads and applies user flatness
.uprst loads and executes user preset
.lic installs purchased license
.ptrain loads and applies pulse train
Basic Operation
Working with Files
83.
Recall From
Sweep menu
Save menu
Mode menu
Amplitude menu
User Preset menu
Pulse Train menu
81