Keysight Technologies N5166B CXG User Manual page 216

Basic Digital Operation (Option 653/655/656/657)
Waveform Sequences
2. Generate the waveform:
Press ARB Off On to On.
This plays the selected waveform sequence. During the waveform sequence generation, both
the I/Q and ARB annunciators turn on, and the waveform modulates the RF carrier.
3. Configure the RF output:
a.Set the RF carrier frequency.
b.Set the RF output amplitude.
c.Turn on the RF output.
The waveform sequence is now available at the signal generator's RF OUTPUT connector.
216
Annunciators display with active waveform (ARB On)
Current waveform selection
Keysight CXG, EXG, and MXG X-Series Signal Generators User's Guide