Installing The Cooling Fan Assembly - Dell DR4300 System Owner's Manual

Figure 14. Removing the cooling fan assembly
1. cooling fan assembly
3. release lever (2)
5. cooling fan connector (6)
Next steps
1. Install the cooling fan assembly.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system

Installing the cooling fan assembly

After working inside your system
Related reference
Safety instructions
Installing the cooling fan assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that are shipped with your product.
1. Follow the safety guidelines listed in Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Ensure that the cables are correctly installed and retained by the cable retention bracket before installing the
cooling fan assembly. Incorrectly installed cables may get damaged.
64 Installing and removing system components
2. cooling fan (6)
4. guide pin on the system board (2)
6. guide pin on the chassis (6)