Quick Sync Indicator Codes; Locating Service Tag Of Your System; Documentation Matrix - Dell E31S Series Owner's Manual

Quick Sync indicator codes

Figure 6. Quick Sync
1. Quick Sync Status Indicator
2. Quick Sync Activation Button
Table 9. Quick Sync indicator codes
Quick Sync indicator
pattern
Slow blink
Solid
Blinks three times rapidly
and then turns off
Blinks continuously when
the mobile device touches
antenna
Blinks rapidly continuously
when the activation button
is pressed
Turns off

Locating Service Tag of your system

Your system is identified by a unique Express Service Code and Service Tag number. The Express Service Code and Service Tag are found
on the front of the system by pulling out the information tag. Alternatively, the information may be on a sticker on the chassis of the
system. This information is used by Dell to route support calls to the appropriate personnel.

Documentation matrix

The documentation matrix describes documents for setting up and managing your system.
Table 10. Documentation matrix
To...
Install your system into a rack
Set up your system and know the system technical specifications
16 Dell DR4300e system overview
Condition
Quick Sync is waiting to be configured from iDRAC.
Quick Sync is ready to transfer.
Quick Sync feature is disabled from iDRAC.
Indicates data transfer activity.
Quick Sync hardware is not responding properly.
Indicates that the Quick Sync feature is turned off. Use the activation button to activate it. If pressing the
activation button does not turn on the LEDs, it indicates that power is not delivered to the Quick Sync
bezel.
Refer to...
Rack documentation included with your rack solution.
Getting Started With Your System that shipped with your system
or see Dell.com/support/home