Initializing The Tpm For Bitlocker Users; Initializing The Tpm For Txt Users - Dell DR4300 System Owner's Manual

Figure 63. Installing the TPM
1. rivet slot on the system board
3. TPM
Next steps
1. Install the system board.
2. Follow the procedure listed in the After working inside your system section.
Related tasks
Before working inside your system
Installing the system board
After working inside your system
Related reference
Safety instructions
System board jumpers and connectors

Initializing the TPM for BitLocker users

Steps
Initialize the TPM.
For more information about initializing the TPM, see http://technet.microsoft.com/en-us/library/cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Initializing the TPM for TXT users

Steps
1. While booting your system, press F2 to enter System Setup.
2. On the System Setup Main Menu screen, click System BIOS → System Security Settings.
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. On the System Setup Main Menu screen, click System BIOS → System Security Settings.
9. From the Intel TXT option, select On.
2. plastic rivet
4. TPM connector
Installing and removing system components 121